chromium steel的例句大全

The results showed that the corrosion weight loss rate of high Mn steel was distinctly greater than that of medium carbon chromium steel. The high Mn steel caustic embrittlement cracking was distinct in corrosion.

结果表明，高锰钢的平均腐蚀速率显著高于中碳铬合金钢，腐蚀过程中高锰钢有较严重的碱脆开裂现象。

Stainless steel comprised austenitic and ferretic stainless steels that contain high amounts of chromium and nickel.

由奥氏体不锈钢和马氏体不锈钢组成的不锈钢.这两种不锈钢均含有较高含量的镍和铬.

The steel member is chromium plated on those surfaces with which the seal interacts.

钢质零件上与密封唇接触的表面以镀铬.

Plasma nitriding of AISI 316 austenitic stainless steel in the condition of chromium ion immersion.

在铬离子淹没AISI316奥氏体不锈钢的条件下进行离子渗氮,研究了渗层的组织、结构和耐磨性能.

When about 2% chromium content adds to the high manganese steel with trace boron, the integrated performance is better.

含硼高锰钢中加入2%左右的铬，综合性能较好。

Chromium and Health Chromium boride has been obtained by salt-bath boriding on chromium electroplated 45 carbon steel.

对45钢表面电镀硬铬层后，在熔渣中向45钢表面的电镀硬铬层渗硼获得了硼化铬覆层。

The paper describes a special equipment for vacuum friction test, and presents f-v test curves for combinations of PTFE-granite, PTFE-chromium plating steel and PTFE-steel ball in a vacuum of 10-3 Torr.

本文描述了一台专用的真空摩擦试验装置，并给出了真空度为10~（-3）托下，PTFE-花岗石、PTFE镀铬铜和PTFE钢球三种摩擦副材料的f-v实验曲线；

The bimetal composites were produced by combining the high chromium and steel.

通过液固结合的方式制备高铬铸铁和中碳钢双金属复合材料.

Series Stainless Steel – An alloy of iron, carbon, and chromium.

400系列不锈钢–一种铁 、 碳和铬的合金.

This paper deals with the granular carbides formation from hot deformation in high chromium cast steel.

本文探讨了热变形高铬铸钢中颗粒状碳化物的形成.

The deposited ferritic weld metal shall not contact the austenitic or high-chromium steel cladding.

熔敷的铁素体焊缝金属不应与奥氏体或高铬钢复层接触.

With an increase of the chromium content in the cast steel, active dissolving corrosion increased, however, tendency of caustic embrittlement cracking decreased.

随着钢中含铬量的增加，试验材料的活性溶解腐蚀失重增大，但碱脆开裂的倾向减少。

While forging the high-carbon chromium bearing steel by the finish forge press, there still remains the issues that the carbide network can not be crushed with the low qualification rate.

精锻机锻造高碳铬轴承钢时存在网状碳化物不易破碎、锻件合格率低的问题。

Regression Curve and Testing of D2 type High-Carbon-and-High-Chromium Steel Carbides' Homogeneity

D2型高碳高铬钢碳化物均匀性的回归与检验

The technics of chemical etching, chemical polishing and chromium electroplating for stainless steel mould were studied.

研究了不锈钢模具板的化学蚀刻 、 化学抛光和电镀铬工艺.